Hollis F1 LT Fins

$320.00 $259.00

YOU SAVE: $61.00 (19%)
  • Product Code: HL214.2201.00

  • Manufacturer: Hollis

  • Average Rating: star star star star star
      5.0 average, based on 1 reviews
  • Quantity

Add to Wishlist

Product Options

Hollis F1 LT Fins

The Hollis F1 LT Fins give power without compromise. These Hollis fins blend graceful movement, power and light weight construction into the one package. Meet the new standard in diving travel fins. The Hollis F1 LT Open Heel Fins use a classic vented fin design combined with new age technologies. These fins are equipped with stainless steel spring heel fin straps with easy grip heel tabs and generous foot pockets for fast donning and doffing. Heel tab loops can also be used to hang the fins for drying or storage in a dive locker. The stainless steel spring heel straps have multiple strap mounting positions allowing for a comfortable, fine tuned fit. The strap mounts are also angled for maximum comfort and a better transition of power.

 

Unlike the original vented fins, the Hollis F1 LT Fins are constructed from a lightweight SEBS compound for easy, light weight traveling without compromising on durability. These blades are strong with a vented paddle design which produces a lot of thrust with the vents just in front of the foot pocket reducing stress and drag during your fin kick cycle. The stainless steel spring heel straps are quick and easy to put on and can be adjusted for tightness too. The fins themselves are constructed from a single piece SEBS polymer material which mean that there aren't any joints so the overall construction of the fins is very tough and can keep up with any terrain you can throw at them.

 

Unlike the original vented fins, the Hollis F1 LT Fins are lighter. The original Hollis F1 fins have always been very popular but where known for being a heavier fin. The LT is made from a new lighter polymer which makes them more positively buoyant and lighter. The tips of the fins are also slightly shorter than the originals which not only makes them easier to fin in confined spaces but also makes them lighter and smaller to pack which is also an important consideration for traveling. The vented blade design with unique channel on the blade tips reduce stress while accelerating water over the blade and focusing the flow of water for added power. The fins have been engineered to enhance propulsion and the efficiency of your stroke offering power without compromise. The Hollis F1 LT Fins foot pocket has the same large design you're used to and will easily allow for use with dry suits and sturdy neoprene boots.

 

These fins are equipped with stainless steel spring heel fins straps with easy grip heel tabs and generous foot pockets for fast donning and doffing. The heel tab loops are extremely convenient when exiting the water as they give you something easy to grab hold off or clip onto and can also be used to hang your fins for drying or storing in a dive locker. The spring heel straps come with multiple strap mounting positions to ensure you get a correct fine tuned fit and the strap mounts are also angled for comfort and a better transition of power. The spring straps are also depth compensating so there is no need for any adjustments while your on a dive. These exciting fins are covered by the Hollis 12 month limited warranty and are available in 3 popular sizes: Regular 6-8 / X-Large 9-11 / XX-Large 12-14.

Features:

  • Material: High grade, light weight SEBS compound
  • Construction: Injection molded
  • Blade type: Vented
  • Design: Open Heel design to be worn with dry suits and sturdy boots
  • Vented blade to reduce stress while accelerating water over the blade
  • Angled strap mounts for comfort and a better transition of power
  • Spring heel straps with easy grip heel tab allow for easy on/off
  • Multiple strap mounting positions allow you to customise the fin to comfortably fit your foot for a fine tuned personalised fit
  • Generous foot pocket allows for use with dry suits and sturdy hard sole booties
  • Weight: 3.08kg / 6.79lbs. - includes packaging
  • Available in 3 sizes: Regular / X-Large / XX-Large
F1
Fin Size

MENS
US Shoe Size

WOMENS
US Shoe Size
 Regular  6-8 7-9
 X-Large   9-11 10-12
 XX-Large  12-14  13-15 

Hollis Australia Product Warranty

Hollis Australia offers product warranty for all Hollis product purchased in Australia from an Authorised Dealer. If you purchase your product outside of Australia, it will not be covered by wartranty in Australia and a service charge will be levied if warranty or normal service is required. You can alternatively return it to the original point of purchase for service. 

Hardware Warranty Period

All Hollis, Oceanic and Aeris Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's), Wings, Personal Dive Computers(PDC’s) and Analogue Gauges, when purchased from an Authorised Australian Dealer, are provided with a 1 year Warranty. This 1 year warranty will cover against any defects in materials, workmanship and performance to product specifications. For specific product warranty details, please refer to what the Warranty actually covers below.

Hardware Warranty Upgrade

All Hollis, Oceanic and Aeris Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's) and Wings, when purchased from an Authorised Australian Dealer, can have their warranty upgraded to a Limited Lifetime Warranty (LLW). This LLW will will cover against any defects in materials, workmanship and performance to product specifications for the life of the product. Digital Instrumentation is provided with a 5 year Limited Warranty. For specific product warranty details, please refer to What the Warranty actually covers below.

For Hollis Regulators and Octo's, this Warranty also covers free annual service parts for life. Obviously some common sense conditions apply. 

Conditions for Hardware Warranty Upgrade

1.The product details must be registered with Hollis Australia within 30 days of purchase. This registration should be completed On-Line, by you or the Dealer, or by completing and returning to Hollis Australia the Warranty Registration form provided by your Authorised Hollis Australia Dealer. You can register your product On-Line here. Note that it is the consumers responsibility to ensure that the product is registered.

2.The product must only be used as intended for normal recreational purposes.

3.All products must be serviced annually by an authorised Hollis, Oceanic or Aeris Service Technician. This warranty upgrade is null and void if such regular annual service is not performed.

4.For Hollis Regulators and Octos, Hollis Australia and your authorised Hollis Australia Dealer will provide all overhaul service parts at no charge. Any parts required other than overhaul service parts are the responsibility of the owner of the product serviced. These exceptions are described in What the Warranty actually covers below. 

5.All labour fees included in annual service are the responsibility of the owner of the product serviced.

6.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Hollis Australia to perform such service.

7.The warranty is non transferable and extends to the original purchaser only.

8.Normal wear and tear as determined by age and usage is excluded from the Hollis, Oceanic or Aeris Limited Lifetime Warranty.

9.To maintain this Limited Lifetime Warranty, you must show proof of purchase and proof of authorised annual service.

Software and Warm Wear Warranty Period

All Hollis, Oceanic, Aeris, Pinnacle, Princeton Tec, McNett, Rob Allen, Ocean Hunter and Ocean Pro Software and Warm Wear, comprising Masks, Snorkels, Fins, Wetsuits, Hoods, Vests, Boots, Gloves, Drysuits, Spear Guns and Accessories, when purchased from an Authorised Australian Dealer, under normal recreational use, is provided with a one (1) year Warranty to cover against defects in materials, workmanship and performance to product specifications. Obviously some common sense conditions apply.

Software and Warm Wear Warranty Conditions

1.Warranty coverage for the above mentioned products will only apply to products accompanied by proof of purchase from an Authorised Australian Dealer.

2.The product must only be used as intended for normal recreational purposes.

3.The product warranty does not cover loss, or damage due to accident, abuse, tampering, lack of maintenance, exposure to excessive temperature, extended sunlight or deteriorating chemicals.

4.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Hollis Australia to perform such service.

5.Normal wear and tear as determined by age and usage is excluded from the 1 year Warranty.

6.To maintain this one year Warranty, you must show proof of purchase. If returned for service, your product should be accompanied by a copy of the original sales receipt.

 

Average Rating: 5

star star star star star

Howard G.

- Jul 08 2017, 12:40 PM

I own the original F1 fins which i find are too heavy for warm water scuba diving, but these are lighter and more suitable for the warmer waters. I still love using my original F1 fins at home but these are a much better traveling option. They are powerful and comfortable to use even on long dives and performing all kicking styles like flutter. helicopter and frog kicks. The F1 LT fins are about an 3.5 cms shorter and about 20 grams lighter than the original F1 which makes them even better for traveling too! I think they hit the right balance when they made them.

Write a review

Helpful Information

Opening Hours

  • Monday - Thursday
    9:00am - 5:30pm
    Friday (Late Shopping)
    9:00am - 5:30pm
    Saturday
    9:00am - 1:00pm
    Sunday
    Closed