Ocean Pro LP Braided Reg Hose - 30 Inch Black

$89.00 $79.00

YOU SAVE: $10.00 (11%)
  • Product Code: 40244.30

  • Manufacturer: Ocean Pro

  • Quantity

Add to Wishlist

Ocean Pro LP Braided Reg Hose - 30 Inch Black

The Ocean Pro Low Pressure Braided Regulator Hose has been designed and developed using a unique manufacturing technology to produce a hose which is not only stronger and more durable but also significantly more flexible and easier to route than the older traditional rubber hoses that divers have been used to. The impressive Ocean Pro Braided Regulator Hoses feature a thermoplastic liner with an inner Polyester braiding and an outer layer braid in Nylon.

 

This superior design will not only last more than 3 times longer than that of a traditional rubber hose but most importantly, because these hoses are so flexible, they will remain kink free and unobstructed even when knotted. In addition to all of these great benefits there is still more, the Ocean Pro Braided Hoses are also 30% lighter which is ideal for traveling divers who are always looking for extras ways to cut there excess weight down.

 

Being in a 30 inch length this hose is ideal for regulators. These hoses feature a 3/8-inch male at the end that screws into the first stage LP port and a 3/8-inch female at the end that screws on to your regulator. These fittings are made from high quality chrome plated brass to provide you with a long working life. The length of the hose is measured in inches, from end to end of hose, including the fittings and their threads. This is a genuine Ocean Pro accessory.

Features:

  • Length: 30 Inch - standard reg size
  • Colour: Black
  • Material: Braided Hose design is manufactured from a thermoplastic liner with an inner Polyester braiding and an outer layer braid in Nylon
  • 30% Lighter than rubber hoses
  • 30% More flexible than rubber hoses
  • 30% More durable than rubber hoses
  • Completely kink free design
  • Super soft braided flex hoses allows for significant improvements with hose routing and comfort when in use 
  • Ideal for the traveling diver looking to cut down on excess weight when going overseas
  • Highly abrasion resistant, minimises potential for nicks or cuts
  • UV resistant safety braid ensures years of trouble free service
  • Significantly longer life span than traditional rubber hoses
  • Operating pressure of 103 Bar (1500 PSI) more than 3 times a standard rubber hose
  • Bursting pressure of 482 bar (7000 PSI) more than 3 times that of a standard rubber hose
  • SGS bursting test approved
  • 3/8-inch Male thread at the end that screws into the first stage LP port
  • 3/8-inch Female thread at the other end that is designed to screw on to your Regulator
  • The fittings are made from high quality chrome plated brass for long life 
  • Length is measured in inches, from end to end of hose, including the fittings and their threads
  • Genuine Ocean Pro accessory

Ocean Pro Australia Product Warranty

AUP Australia offers product warranty for all Ocean Pro product purchased in Australia from an Authorised Dealer. If you purchase your product outside of Australia, it will not be covered by wartranty in Australia and a service charge will be levied if warranty or normal service is required. You can alternatively return it to the original point of purchase for service. 

Software and Warm Wear Warranty Period

All Oceanic, Aeris, Hollis, Pinnacle, Princeton Tec, McNett, Rob Allen, Ocean Hunter and Ocean Pro Software and Warm Wear, comprising Masks, Snorkels, Fins, Wetsuits, Hoods, Vests, Boots, Gloves, Drysuits, Spear Guns and Accessories, when purchased from an Authorised Australian Dealer, under normal recreational use, is provided with a one (1) year Warranty to cover against defects in materials, workmanship and performance to product specifications. Obviously some common sense conditions apply.

Software and Warm Wear Warranty Conditions

1.Warranty coverage for the above mentioned products will only apply to products accompanied by proof of purchase from an Authorised Australian Dealer.

2.The product must only be used as intended for normal recreational purposes.

3.The product warranty does not cover loss, or damage due to accident, abuse, tampering, lack of maintenance, exposure to excessive temperature, extended sunlight or deteriorating chemicals.

4.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Oceanic Australia to perform such service.

5.Normal wear and tear as determined by age and usage is excluded from the 1 year Warranty.

6.To maintain this one year Warranty, you must show proof of purchase. If returned for service, your product should be accompanied by a copy of the original sales receipt.

 

This product hasn't been reviewed yet. Write a review