Oceanic Alpha 10 CDX Regulator

$899.00 $719.00

YOU SAVE: $180.00 (20%)
  • Product Code: REAXCDXY | REAXCDXD

  • Manufacturer: Oceanic

  • UPC: 40.3771.07

  • Average Rating: starstarstarstarstar
      5.0 average, based on 1 reviews
  • Quantity

Add to Wishlist

Product Options

Oceanic Alpha 10 CDX Regulator

Simple, dependable and economical. What else would you expect from a design as refined and perfected as the Oceanic Alpha? Effortless breathing in a compact design that is extremely tough yet easy to maintain and service. The Oceanic Alpha 10 CDX First Stage Regulator is a Balanced Diaphragm and is made of triple chromed marine grade brass for maximum durability and long life. The first stage has 4 LP ports and 2 HP port with 3/8" and 7/16" threads. The LP ports are angled for optimum hose routing. Regulator can be used with Air or Nitrox mixtures up to 40 percent right out of the box.

 

The balanced diaphragm, first stage regulator is inherently environmentally sealed. The benefit of this type of first stage design is that none of the delicate internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants can cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance. An added bonus is that a environmentally sealed balanced diaphragm first stage regulator requires less maintenance then regulators that allow contaminates to enter their internal mechanisms.

 

The Alpha 10 Second Stage Regulator is a pneumatically balance demand valve design regulator for ease of breathing at all depths and cylinder pressures. The balanced feature will perform flawlessly at high and low cylinder pressures automatically. Oceanic's easy adjustment technology, dive/pre-dive Venturi control will prevent unwanted free flow when surface swimming from the shore, jumping off the back of a boat or diving into a current and a super comfortable orthodontic mouthpiece with bite tabs significantly increases diver enjoyment. The low profile light weight second stage has a 6.75cm / 2.66" diameter and is equipped with a highly durable and flexible 76.2cm / 30" Miflex braided low pressure hose with a 3/8" threaded fitting to further increase your diving comfort.

 

This items includes the Regulator first and second stage as well as an owner's manual. The regulator is proudly made in the USA. The Oceanic Alpha 10 CDX regulator set is Nitrox compatible to 40% straight out of the box and is supplied in the one colour: Black. Divers can choose from two first stage configuration options: 232 BAR Yoke or 300 BAR DIN.

Bonus Inclusions:

  • Oceanic Australia Lifetime Warranty guaranties you complete peace of mind and security in the life of your investment
  • Oceanic 2 Year Service Interval with Inspection program
  • Oceanic Parts For Life Program Ensures Free Parts for life when you register your gear online and have your gear serviced annually

Oceanic Alpha 10 Second Stage Features:

  • Pneumatically Balanced designed Second Stage
  • Delivers divers with a phenomenal breathing experience at all depths and all cylinder pressures
  • Dive/Pre-Dive Venturi Switch allows divers to control gas delivery volume
  • Super comfortable Orthodontic Mouthpiece with bite tabs to eliminate jaw fatique and maximise comfort
  • Includes a 3/8" Threaded Miflex Braided LP Hose - 76.2cm / 30"
  • Low profile light weight design
  • Diameter: 6.75cm / 2.66"

Oceanic CDX First Stage Features:

  • Simple, Dependable and Economical
  • Balanced Diagram design provides divers with a phenomenal breathing experience at all depths and all cylinder pressures
  • Tripled chromed plated marine grade brass construction
  • Balanced diaphragm design
  • Inherently environmentally sealed to keep out contaminates
  • Diaphragm keeps delicate internal parts from exposure to contaminants
  • No deterioration from salt, sand, chlorine or pool acids
  • Requires less maintenance and is easy to maintain
  • LP Ports angled for optimum hose routing
  • Includes: 4 Low Pressure Ports with 3/8" Thread
  • Includes: 2 High Pressure Ports with 7/16" Thread
  • Nitrox compatible to 40% straight out of the box
  • Available in two configuration options: 232 BAR Yoke or 300 BAR DIN

Bonus Inclusions:

  • Oceanic Australia Lifetime Warranty guaranties you complete peace of mind and security in the life of your investment
  • Oceanic 2 Year Service Interval with Inspection program
  • Oceanic Parts For Life Program Ensures Free Parts for life when you register your gear online and have your gear serviced annually

Oceanic Australia Product Warranty

Australian Underwater products offers product warranty for all Oceanic product purchased in Australia from an Authorised Dealer. If you purchase your product outside of Australia, it will not be covered by warranty in Australia and a service charge will be levied if warranty or normal service is required. You can alternatively return it to the original point of purchase for service. 

Hardware Warranty Period

All Oceanic Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's), Wings, Personal Dive Computers (PDC’s) and Analogue Gauges, when purchased from an Authorised Australian Dealer, are provided with a 1 year Warranty. This 1 year warranty will cover against any defects in materials, workmanship and performance to product specifications. For specific product warranty details, please refer to what the Warranty actually covers below.

Hardware Warranty Upgrade

All Oceanic Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's) and Wings, when purchased from an Authorised Australian Dealer, can have their warranty upgraded to a Limited Lifetime Warranty (LLW). This LLW will will cover against any defects in materials, workmanship and performance to product specifications for the life of the product. Digital Instrumentation is provided with a 5 year Limited Warranty. For specific product warranty details, please refer to What the Warranty actually covers below.

For Oceanic Regulators and Octo's, this Warranty also covers free annual service parts for life. Obviously some common sense conditions apply. 

Conditions for Hardware Warranty Upgrade

1.The product details must be registered with Oceanic Australia within 30 days of purchase. This registration should be completed On-Line, by you or the Dealer, or by completing and returning to Oceanic Australia the Warranty Registration form provided by your Authorised Oceanic Australia Dealer. You can register your product On-Line here. Note that it is the consumers responsibility to ensure that the product is registered.

2.The product must only be used as intended for normal recreational purposes.

3.All products must be serviced annually by an authorised Oceanic Service Technician. This warranty upgrade is null and void if such regular annual service is not performed.

4.For Oceanic Regulators and Octos, Australian Underwater Products and your authorised Oceanic Australia Dealer will provide all overhaul service parts at no charge. Any parts required other than overhaul service parts are the responsibility of the owner of the product serviced. These exceptions are described in What the Warranty actually covers below. 

5.All labour fees included in annual service are the responsibility of the owner of the product serviced.

6.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Australian Underwater Products to perform such service.

7.The warranty is non transferable and extends to the original purchaser only.

8.Normal wear and tear as determined by age and usage is excluded from the Oceanic Limited Lifetime Warranty.

9.To maintain this Limited Lifetime Warranty, you must show proof of purchase and proof of authorised annual service.

Software and Warm Wear Warranty Period

All Oceanic Software and Warm Wear, comprising Masks, Snorkels, Fins, Wetsuits, Hoods, Vests, Boots, Gloves, Drysuits, Spear Guns and Accessories, when purchased from an Authorised Australian Dealer, under normal recreational use, is provided with a one (1) year Warranty to cover against defects in materials, workmanship and performance to product specifications. Obviously some common sense conditions apply.

Software and Warm Wear Warranty Conditions

1.Warranty coverage for the above mentioned products will only apply to products accompanied by proof of purchase from an Authorised Australian Dealer.

2.The product must only be used as intended for normal recreational purposes.

3.The product warranty does not cover loss, or damage due to accident, abuse, tampering, lack of maintenance, exposure to excessive temperature, extended sunlight or deteriorating chemicals.

4.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Australian Underwater Products to perform such service.

5.Normal wear and tear as determined by age and usage is excluded from the 1 year Warranty.

6.To maintain this one year Warranty, you must show proof of purchase. If returned for service, your product should be accompanied by a copy of the original sales receipt.

 

Average Rating: 5

starstarstarstarstar

Sammy K.

- Jul 18 2019, 12:34 PM

I love this set up! Works well no matter your position. I highly recommend the Oceanic Alpha 10

Write a review

Helpful Information

Opening Hours

  • Monday - Thursday
    9:00am - 5:30pm
    Friday (Late Shopping)
    9:00am - 5:30pm
    Saturday
    9:00am - 1:00pm
    Sunday
    Closed