Oceanic HP Hose - 6 Inch

$64.00 $60.00

YOU SAVE: $4.00 (6%)
  • Product Code: HL204.2380.006

  • Manufacturer: Oceanic

  • Quantity

Add to Wishlist

Oceanic HP Hose - 6 Inch

How many times have you been on a dive boat and watched someone mistake your expensive Wireless Transmitter for a tank handle and then try to lift the full weight of your scuba kit whilst using the transmitter to do it. The Oceanic 6 Inch High Pressure Hose is the ideal solution for protecting your valuable Wireless Transmitter from accidental breakage. The Oceanic 6 inch HP Hose allows for flexibility and movement between your transmitter and your first stage which eliminates the chance for accidental breakage from a thoughtless diver. In our experience we have also found that these 6 inch hoses actually improve the range of the transmitter by sitting the transmitter further out from behind your shoulder. In addition many tec and sidemount divers will choose to use the Oceanic 6 Inch HP Hose on their primary and stage cylinders in conjunction with their single analouge SPG gauge. Also don't forget to grab yourself an Oceanic HP Air Spool and somesilicone grease to complete your seal when you check out.

Features:

  • Size: 15.24 cm / 6 inch
  • Rated: 340 BAR / 5000 PSI
  • Maximum burst pressure rated: 1,378 BAR / 20,000 PSI
  • Fittings are made from high quality chrome plated brass for long life 
  • 7/16-inch Male thread at the end that screws into the first stage HP port
  • 7/16-inch female thread at the end that screws on to the SPG/Transmitter
  • The ideal solution for protecting your valuable Wireless Transmitter from accidental breakage from careless divers
  • Allows for flexibility and movement between your transmitter and your first stage
  • We have found that the use of this hose actually improve the range of the transmitter by sitting the transmitter further out from behind your shoulder
  • Highly desirable piece of kit for tec and sidemount divers
  • Don't forget to grab yourself an Oceanic HP Air Spool and somesilicone grease to complete your seal when you check out
  • Genuine Oceanic accessory

Oceanic Australia Product Warranty

Australian Underwater products offers product warranty for all Oceanic product purchased in Australia from an Authorised Dealer. If you purchase your product outside of Australia, it will not be covered by warranty in Australia and a service charge will be levied if warranty or normal service is required. You can alternatively return it to the original point of purchase for service. 

Hardware Warranty Period

All Oceanic Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's), Wings, Personal Dive Computers (PDC’s) and Analogue Gauges, when purchased from an Authorised Australian Dealer, are provided with a 1 year Warranty. This 1 year warranty will cover against any defects in materials, workmanship and performance to product specifications. For specific product warranty details, please refer to what the Warranty actually covers below.

Hardware Warranty Upgrade

All Oceanic Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's) and Wings, when purchased from an Authorised Australian Dealer, can have their warranty upgraded to a Limited Lifetime Warranty (LLW). This LLW will will cover against any defects in materials, workmanship and performance to product specifications for the life of the product. Digital Instrumentation is provided with a 5 year Limited Warranty. For specific product warranty details, please refer to What the Warranty actually covers below.

For Oceanic Regulators and Octo's, this Warranty also covers free annual service parts for life. Obviously some common sense conditions apply. 

Conditions for Hardware Warranty Upgrade

1.The product details must be registered with Oceanic Australia within 30 days of purchase. This registration should be completed On-Line, by you or the Dealer, or by completing and returning to Oceanic Australia the Warranty Registration form provided by your Authorised Oceanic Australia Dealer. You can register your product On-Line here. Note that it is the consumers responsibility to ensure that the product is registered.

2.The product must only be used as intended for normal recreational purposes.

3.All products must be serviced annually by an authorised Oceanic Service Technician. This warranty upgrade is null and void if such regular annual service is not performed.

4.For Oceanic Regulators and Octos, Australian Underwater Products and your authorised Oceanic Australia Dealer will provide all overhaul service parts at no charge. Any parts required other than overhaul service parts are the responsibility of the owner of the product serviced. These exceptions are described in What the Warranty actually covers below. 

5.All labour fees included in annual service are the responsibility of the owner of the product serviced.

6.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Australian Underwater Products to perform such service.

7.The warranty is non transferable and extends to the original purchaser only.

8.Normal wear and tear as determined by age and usage is excluded from the Oceanic Limited Lifetime Warranty.

9.To maintain this Limited Lifetime Warranty, you must show proof of purchase and proof of authorised annual service.

Software and Warm Wear Warranty Period

All Oceanic Software and Warm Wear, comprising Masks, Snorkels, Fins, Wetsuits, Hoods, Vests, Boots, Gloves, Drysuits, Spear Guns and Accessories, when purchased from an Authorised Australian Dealer, under normal recreational use, is provided with a one (1) year Warranty to cover against defects in materials, workmanship and performance to product specifications. Obviously some common sense conditions apply.

Software and Warm Wear Warranty Conditions

1.Warranty coverage for the above mentioned products will only apply to products accompanied by proof of purchase from an Authorised Australian Dealer.

2.The product must only be used as intended for normal recreational purposes.

3.The product warranty does not cover loss, or damage due to accident, abuse, tampering, lack of maintenance, exposure to excessive temperature, extended sunlight or deteriorating chemicals.

4.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Australian Underwater Products to perform such service.

5.Normal wear and tear as determined by age and usage is excluded from the 1 year Warranty.

6.To maintain this one year Warranty, you must show proof of purchase. If returned for service, your product should be accompanied by a copy of the original sales receipt.

This product hasn't been reviewed yet. Write a review

Helpful Information

Opening Hours

  • Monday - Thursday
    9:00am - 5:30pm
    Friday (Late Shopping)
    9:00am - 5:30pm
    Saturday
    9:00am - 1:00pm
    Sunday
    Closed