Oceanic MaxFlex Reg Hose - Delta 4.2 Swivel (std. reg)

$139.00 $129.00

YOU SAVE: $10.00 (7%)
  • Product Code: REZHMSD

  • Manufacturer: Oceanic

  • Quantity

Add to Wishlist

Oceanic MaxFlex Reg Hose - Delta 4.2 Swivel (std. reg)

This Oceanic MaxFlex LP Braided Regulator Hose has been exclusively designed to fit the Oceanic Delta 4.2 Swivel regulator. Included with this hose is a built in Swivel to improve diver comfort and allow for improved hose routing flexibility. Please be aware that this hose will only fit onto the newer models of the Oceanic Swivel Delta 4.2 regulator and that it will not fit onto the older, non-swivel models without an adaptor kit. Should you need this adaptor kit pleasecontact usThis hose has been designed and developed using a unique manufacturing technology to produce a hose which is not only stronger and more durable but also significantly more flexible and easier to route than the older traditional rubber hoses that divers have been used to. The impressive Oceanic MaxFlex Braided Regulator Hoses feature a thermoplastic liner with an inner polyester braiding and an outer layer braid in nylon. This superior design will not only last more than 3 times longer than that of a traditional rubber hose but most importantly, because these hoses are so flexible, they will remain kink free and unobstructed even when knotted. In addition to all of these great benefits there is still more, the Oceanic MaxFlex Braided Hoses are also 30% lighter which is ideal for traveling divers who are always looking for extras ways to cut there excess weight down. Being in a 30 inch length, this hose is ideal for the Delta 4.2 primary regulator. These hoses feature a 3/8-inch male at the end that screws into the first stage LP port and a 3/8-inch female at the end that screws on to your regulator. These fittings are made from high quality chrome plated brass to provide you with a long working life. The length of the hose is measured in inches, from end to end of hose, including the fittings and their threads. This is a genuine Oceanic accessory.

Please be aware that this hose will only fit onto the newer models of the Oceanic Swivel Delta 4.2 regulator and that it will not fit onto the older, non-swivel models without an adaptor kit. Should you need this adaptor kit pleasecontact us.

Features:

  • Length: 30 Inch (std. reg size)
  • Colour: Black
  • Special fit: Exclusively designed to fit the Oceanic Delta 4.2 Swivel regulator
  • Swivel: Delta 4.2 Swivel is included with this hose for improved comfort and flexibility
  • Please be aware that this hose will only fit onto the newer models of the Oceanic Swivel Delta 4.2 regulator
  • It will not fit onto the older, non-swivel models without an adaptor kit
  • Material: Braided Hose design is manufactured from a thermoplastic liner with an inner polyester braiding and an outer layer braid in nylon
  • 30% Lighter, 30% More flexible, 30% More durable than rubber hoses and is completely kink free
  • Super soft braided flex hoses allows for significant improvements with hose routing and comfort when in use 
  • Ideal for the traveling diver looking to cut down on excess weight when going overseas
  • Highly abrasion resistant, minimises potential for nicks or cuts
  • UV resistant safety braid ensures years of trouble free service
  • Significantly longer life span than traditional rubber hoses
  • Operating pressure of 103 Bar (1500 PSI) more than 3 times a standard rubber hose
  • Bursting pressure of 482 bar (7000 PSI) more than 3 times that of a standard rubber hose
  • SGS bursting test approved
  • 3/8-inch Male thread at the end that screws into the first stage LP port
  • 3/8-inch Female thread at the other end with built in swivel designed to screw on to your Delta 4.2 Regulator
  • The fittings are made from high quality chrome plated brass for long life 
  • Length is measured in inches, from end to end of hose, including the fittings and their threads
  • Genuine Oceanic accessory

Oceanic Australia Product Warranty

Australian Underwater products offers product warranty for all Oceanic product purchased in Australia from an Authorised Dealer. If you purchase your product outside of Australia, it will not be covered by warranty in Australia and a service charge will be levied if warranty or normal service is required. You can alternatively return it to the original point of purchase for service. 

Hardware Warranty Period

All Oceanic Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's), Wings, Personal Dive Computers (PDC’s) and Analogue Gauges, when purchased from an Authorised Australian Dealer, are provided with a 1 year Warranty. This 1 year warranty will cover against any defects in materials, workmanship and performance to product specifications. For specific product warranty details, please refer to what the Warranty actually covers below.

Hardware Warranty Upgrade

All Oceanic Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's) and Wings, when purchased from an Authorised Australian Dealer, can have their warranty upgraded to a Limited Lifetime Warranty (LLW). This LLW will will cover against any defects in materials, workmanship and performance to product specifications for the life of the product. Digital Instrumentation is provided with a 5 year Limited Warranty. For specific product warranty details, please refer to What the Warranty actually covers below.

For Oceanic Regulators and Octo's, this Warranty also covers free annual service parts for life. Obviously some common sense conditions apply. 

Conditions for Hardware Warranty Upgrade

1.The product details must be registered with Oceanic Australia within 30 days of purchase. This registration should be completed On-Line, by you or the Dealer, or by completing and returning to Oceanic Australia the Warranty Registration form provided by your Authorised Oceanic Australia Dealer. You can register your product On-Line here. Note that it is the consumers responsibility to ensure that the product is registered.

2.The product must only be used as intended for normal recreational purposes.

3.All products must be serviced annually by an authorised Oceanic Service Technician. This warranty upgrade is null and void if such regular annual service is not performed.

4.For Oceanic Regulators and Octos, Australian Underwater Products and your authorised Oceanic Australia Dealer will provide all overhaul service parts at no charge. Any parts required other than overhaul service parts are the responsibility of the owner of the product serviced. These exceptions are described in What the Warranty actually covers below. 

5.All labour fees included in annual service are the responsibility of the owner of the product serviced.

6.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Australian Underwater Products to perform such service.

7.The warranty is non transferable and extends to the original purchaser only.

8.Normal wear and tear as determined by age and usage is excluded from the Oceanic Limited Lifetime Warranty.

9.To maintain this Limited Lifetime Warranty, you must show proof of purchase and proof of authorised annual service.

Software and Warm Wear Warranty Period

All Oceanic Software and Warm Wear, comprising Masks, Snorkels, Fins, Wetsuits, Hoods, Vests, Boots, Gloves, Drysuits, Spear Guns and Accessories, when purchased from an Authorised Australian Dealer, under normal recreational use, is provided with a one (1) year Warranty to cover against defects in materials, workmanship and performance to product specifications. Obviously some common sense conditions apply.

Software and Warm Wear Warranty Conditions

1.Warranty coverage for the above mentioned products will only apply to products accompanied by proof of purchase from an Authorised Australian Dealer.

2.The product must only be used as intended for normal recreational purposes.

3.The product warranty does not cover loss, or damage due to accident, abuse, tampering, lack of maintenance, exposure to excessive temperature, extended sunlight or deteriorating chemicals.

4.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Australian Underwater Products to perform such service.

5.Normal wear and tear as determined by age and usage is excluded from the 1 year Warranty.

6.To maintain this one year Warranty, you must show proof of purchase. If returned for service, your product should be accompanied by a copy of the original sales receipt.

This product hasn't been reviewed yet. Write a review