Zeagle Fill Adapter for Razor II

$99.00 $89.00

YOU SAVE: $10.00 (10%)
  • Product Code: 330-FA10-AA

  • Manufacturer: Zeagle

  • Quantity

Add to Wishlist

Zeagle Fill Adapter for Razor II

Since the Zeagle Razor is both a regulator and a valve, a means must be provided to fill the cylinder that the Razor is screwed into. To use this connector, a cap is unscrewed from the filling probe on the Razor and the Zeagle Fill Adapter is connected in its place. If you wish to fill your Razor from a scuba fill whip adaptor from a compressor or a fill panel, then this adapter is the one that you are looking for.


The Zeagle Fill Adapter is made from durable and corrosion resistant chrome plated marine grade brass and it works just like your quick disconnect fitting on your BCD hose. Once installed on the Razor First Stage this fill adapter will let you re-charge the Razor system with gas from a standard fill whip at the dive shop or charter boat fill station. This adapter is for service pressures up to 200 BAR / 3,000 PSI and it is a genuine Zeagle accessory.


  • Rated: HP Fitting rated to 200 BAR / 3,000 PSI
  • Material: Chrome plated marine grade brass
  • Purpose: Designed to fit the Zeagle Razor First Stage Regulator from a compressor fill whip hose
  • Connection: Quick disconnect style coupling

Zeagle Australia Product Warranty

Australian Underwater Products offers product warranty for all Zeagle product purchased in Australia from an Authorised Dealer. If you purchase your product outside of Australia, it will not be covered by warranty in Australia and a service charge will be levied if warranty or normal service is required. You can alternatively return it to the original point of purchase for service. 

Hardware Warranty Period

All Zeagle Hardware, comprising Regulators, Octopus Regulators (Octo's), Buoyancy Compensators (BC's), Wings, Personal Dive Computers(PDC’s) and Analogue Gauges, when purchased from an Authorised Australian Dealer, are provided with a 1 year Warranty. This 1 year warranty will cover against any defects in materials, workmanship and performance to product specifications. For specific product warranty details, please refer to what the Warranty actually covers.

Software and Warm Wear Warranty Period

All Zeagle Software and Warm Wear, comprising Masks, Snorkels, Fins, Wetsuits, Hoods, Vests, Boots, Gloves, Drysuits, Spear Guns and Accessories, when purchased from an Authorised Australian Dealer, under normal recreational use, is provided with a one (1) year Warranty to cover against defects in materials, workmanship and performance to product specifications. Obviously some common sense conditions apply.

Software and Warm Wear Warranty Conditions

1.Warranty coverage for the above mentioned products will only apply to products accompanied by proof of purchase from an Authorised Australian Dealer.

2.The product must only be used as intended for normal recreational purposes.

3.The product warranty does not cover loss, or damage due to accident, abuse, tampering, lack of maintenance, exposure to excessive temperature, extended sunlight or deteriorating chemicals.

4.This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Zeagle Australia to perform such service.

5.Normal wear and tear as determined by age and usage is excluded from the 1 year Warranty.

6.To maintain this one year Warranty, you must show proof of purchase. If returned for service, your product should be accompanied by a copy of the original sales receipt.


This product hasn't been reviewed yet. Write a review

Helpful Information

Opening Hours

  • Monday - Thursday
    9:00am - 5:30pm
    Friday (Late Shopping)
    9:00am - 5:30pm
    9:00am - 1:00pm