Features:

• Material: 304 Marine grade stainless steel for superior rust prevention
• Designed to firmly secure the Hollis HTS 2 soft backplate system to your twin tank set up
• The soft backplate and the wing are locked between the double tanks and the stabiliser plates
• These Hollis Stabiliser Plates eliminate the need for a standard backplate
• Pre-curved deign to accommodate the fit for the spacing of double tanks
• Hand rounded finish eliminates any sharp edges
• Sold as a pair: 2 x Hollis Stabiliser Plates

Hollis Australia Product Warranty

Hollis is proudly distributed in Australia by Australia Underwater Products (AUP). AUP offers product warranty for all Hollis products purchased in Australia from an Authorised Dealer. If you purchase your product outside of Australia, it will not be covered by Warranty in Australia and a service charge will be levied if Warranty or normal service is required. You can alternatively return it to the original point of purchase for service. 

Hardware Warranty Period

All Hollis Hardware, comprising Regulators, Octopus Regulators, Buoyancy Compensators, Wings, Personal Dive Computers, Rebreathers and Analogue Gauges, when purchased from an Authorised Australian Dealer, are provided with a 1 year Warranty. This 1 year Warranty will cover against any defects in materials, workmanship and performance to product specifications. For specific product warranty details, please refer to what the Warranty actually covers below.

Hardware Warranty Upgrade

All Hollis Hardware, comprising Regulators, Octopus Regulators, Buoyancy Compensators, Wings, Personal Dive Computers, Rebreathers and Analogue Gauges when purchased from an Authorised Australian Dealer, can have their Warranty upgraded to a Limited Lifetime Warranty (LLW). This LLW will will cover against any defects in materials, workmanship and performance to product specifications for the life of the product. Digital Instrumentation is provided with a 5 year Limited Warranty. For specific product Warranty details, please refer to What the Warranty actually covers below.

For Hollis Regulators and Octopus Regulators, this Warranty also covers Free Annual Service Parts For Life. Obviously some common sense conditions apply. 

Conditions for Hardware Warranty Upgrade

1.The product details must be registered with AUP within 30 days of purchase. This registration should be completed On-Line, by you or the Dealer, or by completing and returning to AUP the Warranty Registration form provided by your Authorised Hollis Australia Dealer. You can register your product On-Line here. Note that it is the consumers responsibility to ensure that the product is registered.

2.The product must only be used as intended for normal recreational purposes.

3.All products must be serviced annually by an Authorised Hollis Service Technician. This Warranty Upgrade is null and void if such regular annual service is not performed.

4.For Hollis Regulators and Octopus Regulators, AUP and your Authorised Hollis Australia Dealer will provide all overhaul service parts at No Charge. Any parts required other than overhaul service parts are the responsibility of the owner of the product serviced. These exceptions are described in What the Warranty actually covers below. 

5.All labour fees included in annual service are the responsibility of the owner of the product serviced.

6.This Warranty shall be void if the equipment has been tampered with by a person (or persons) not Authorised by AUP to perform such service.

7.The Warranty is non transferable and extends to the original purchaser only.

8.Normal wear and tear as determined by age and usage is excluded from the Hollis Limited Lifetime Warranty.

9.To maintain this Limited Lifetime Warranty, you must show proof of purchase and proof of Authorised annual service.

Software and Warm Wear Warranty Period

All Hollis Software and Warm Wear, comprising Masks, Snorkels, Fins, Wetsuits, Hoods, Knives, Vests, Boots, Gloves, Drysuits, Undergarments and Accessories, when purchased from an Authorised Australian Dealer, under normal recreational use, is provided with a one (1) year Warranty to cover against defects in materials, workmanship and performance to product specifications. Obviously some common sense conditions apply.

Software and Warm Wear Warranty Conditions

1.Warranty coverage for the above mentioned products will only apply to products accompanied by proof of purchase from an Authorised Australian Dealer.

2.The product must only be used as intended for normal recreational purposes.

3.The product Warranty does not cover loss, or damage due to accident, abuse, tampering, lack of maintenance, exposure to excessive temperature, extended sunlight or deteriorating chemicals.

4.This Warranty shall be void if the equipment has been tampered with by a person (or persons) not Authorised by AUP to perform such service.

5.Normal wear and tear as determined by age and usage is excluded from the one year Warranty.

6.To maintain this one year Warranty, you must show proof of purchase. If returned for service, your product should be accompanied by a copy of the original sales receipt.